Cables and Connectors

10
Yes
None
1
50
Name...
/products/cables-and-connectors/
Thumbnail

Categories:

Coaxial Cables 50 Ohms
Coaxial Cable - RG-58C/U
Coaxial Cable - RG-58C/U Image

RG58C/U Coaxial Cable Mil-17F 50 Ohm •RG-58C/U is available on 100 meter reels.

Typically used in the installation of Cell Signal Boosters.

Coaxial Cable - RG-213
Coaxial Cable - RG-213 Image

RG213 MIL-SPEC Coaxial Cable,50 Ohm< •RG-58C/U is available on 100 meter reels.

Typically used in the installation of Cell Signal Boosters.

Coaxial Cable - RG-174
Coaxial Cable - RG-174 Image

RG174 A/U MIL SPEC Miniature Coaxial Cable, 50 Ohm •RG-58C/U is available on 100 meter reels.

Typically used in the installation of Cell Signal Boosters.

Feeder Cables 50 Ohms
Feeder Cable - 1/2
Feeder Cable - 1/2 Image

½” Flexible Low Loss Foam Dielectric.
•Copper Clad Aluminium.
•Inner Conductor Diameter 4.8mm.
•Gas-injected Foam PE.
•Dielectric Diameter 12.2mm.
•Outer Conductor 14.9mm.
•Jacket 16.00mm Standard or Flame Retardant.
•Cable Weight 242Kg/KM.
•N-Type male or female termination.

Typically used in the installation of Cell Signal Boosters.

Feeder Cable - 7/8
Feeder Cable - 7/8 Image

7/8″Flexible Low Loss Foam Dielectric 50 Ohm.
•Copper Clad Aluminium.
•Inner Conductor Diameter 9.0mm.
•Gas-injected Foam PE.
•Dielectric Diameter 23.2mm.
•Outer Conductor 24.9mm.
•Jacket 27.9mm Standard or Flame Retardant.
•Cable Weight 595Kg/KM.

Typically used in the installation of Cell Signal Boosters.

Low Loss Cables 50 Ohms
Coaxial Cable - LWC-195 Low Loss Coaxial
Coaxial Cable - LWC-195 Low Loss Coaxial Image

LWC-195 Super Low Loss Coaxial Cable – Injected Foam Polyethylene – 50 Ohm.
• LWC-195 is a black UV Resistant Polyethylene jacketed cable designed for in/outdoor use.
• The bending and handling characteristics are significantly better than corrugated hard-line cables.
• LCW-195 is a super low loss flexible cable and comparable to semirigid hard-line cables.
• The RF Shielding is better than typical single shielded coax.
• The multi-ply bonded foil outer conductor is conservatively rated at > 90 dB (i.e. >180dB between two adjacent cables).
• All relevant connectors, adaptors and crimping tools are available at LinkWorld.
• LWC195 is available on 100 meter reels.

Typically used in the installation of Cell Signal Boosters.

Coaxial Cable - LWC-240 Low Loss Coaxial
Coaxial Cable - LWC-240 Low Loss Coaxial Image

LWC-240 Super Low Loss Coaxial Cable – Injected Foam Polyethylene – 50 Ohm •LWC-240 is available on 100 meter reels.

Typically used in the installation of Cell Signal Boosters.

Coaxial Cable - LWC-400 Low Loss Coaxial
Coaxial Cable - LWC-400 Low Loss Coaxial Image

LWC-400 Super Low Loss Coaxial Cable – Injected Foam Polyethene – 50 Ohm.
• LLWC-400 is a black UV Resistant Polyethene jacketed cable designed for in/outdoor use.
• The bending and handling characteristics are significantly better than corrugated hard-line cables.
• LCW-400 is a super low loss flexible cable and comparable to semirigid hard-line.
• The RF Shielding is better than typical single shielded coax.
•The multi-ply bonded foil outer conductor is conservatively rated at > 90 dB (i.e. >180dB between two adjacent cables).
• All relevant connectors, adaptors and crimping tools are available at LinkWorld.
• LWC400 is available on 100 meter reels.

Typically used in the installation of Cell Signal Boosters.

Coaxial Cable - LWC-600 Super Low Loss Coaxial
Coaxial Cable - LWC-600 Super Low Loss Coaxial Image

LWC-600 Super Low Loss Coaxial Cable – Injected Foam Polyethene – 50 Ohm.
• LWC-600 is a black UV Resistant Polyethene jacketed cable designed for in/outdoor use.
• The bending and handling characteristics are significantly better than corrugated hard-line cables.
• LCW-600 is a super low loss flexible cable and comparable to semirigid hard-line.
• The RF Shielding is better than typical single shielded coax.
• The multi-ply bonded foil outer conductor is conservatively rated at > 90 dB (i.e. >180dB between two adjacent cables).
• All relevant connectors, adaptors and crimping tools are available at LinkWorld.

Typically used in the installation of Cell Signal Boosters.

Cables, Connectors and Adapters
Connectors and Adapters - N TYPE Range of Connectors and Adapters
Connectors and Adapters - N TYPE Range of Connectors and Adapters Image

Large range of N-Type connectors and adaptors:

• The N series are very popular screw-coupling middle-power coaxial connectors, which are developed and manufactured according to the specifications of MIL-C-39012, IEC 169-16 and CECC 2210.
• They have the characteristics of vibration -proof, high reliability, superior electrical and mechanical properties, are widely used for communication applications where vibration resistance and environmental protection is required.
• Specify on what cable the connectors will be terminated onto.
• Crimping tools and heat shrink are available at LinkWorld.

Connectors and Adapters - SMA Range of Connectors and Adapters
Connectors and Adapters - SMA Range of Connectors and Adapters Image

Large range of SMA connectors and adapters:

• The SMA series is a very popular screw coupling miniature coaxial connector, which is developed and produced according to the relative specifications of MIL-C-39012, IEC 169-15 and CECC 22110.
• They have the characteristics of high reliability, high mechanical stability, long life, and optimum electrical properties, are widely used to connect RF coaxial cables for microwave equipment and electronic communication instruments.
• Specify on what cable the connectors will be terminated onto.
• Crimping tools and heat shrink are available at LinkWorld.

Connectors and Adapters - BNC Range Of Connectors And Adapters
Connectors and Adapters - BNC Range Of Connectors And Adapters Image

Large range of BNC connectors and adaptors:

• The BNC series are bayonet coupling standard coaxial connectors,
which developed and manufactured according to the specifications of MIL-C-39012 and IEC169-8.
• They have the characteristics of rapid engage and disengage, high reliability, etc. is used to connect RF coaxial cables in electrical equipment and instruments.
• Specify on what cable the connectors will be terminated onto.
• Crimping tools and heat shrink are available at LinkWorld.

Connectors and Adapters - TNC Range of Connectors and Adapters
Connectors and Adapters - TNC Range of Connectors and Adapters Image

Large range of TNC connectors and adaptors:

• The TNC series are screw-coupling standard coaxial connectors which are developed according to the specifications of MIL-C-39012 and IEC 169-17.
• They have the characteristics of wide frequency band, convenient connection, vibration-proof, excellent electrical and mechanical properties, are particularly suitable for use in mobile devices with severe vibrations.
• Specify on what cable the connectors will be terminated onto.
• Crimping tools and heat shrink are available at LinkWorld.

Connectors and Adapters - UHF Range of Connectors And Adapters
Connectors and Adapters - UHF Range of Connectors And Adapters Image

Large range of UHF connectors and adaptors:

• UHF coaxial connectors are general purpose units developed for use in low-frequency systems from 0.6 – 300 MHz.
• Invented for use in the radio industry, UHF is an acronym for Ultra High Frequency because at the time 300 MHz was considered high.
• UHF connectors feature a threaded coupling.
• Because these connectors are low-cost, the impedance is variable.
• Specify on what cable the connectors will be terminated onto.
• Crimping tools and heat shrink are available at LinkWorld.

Connectors & Adapters - FME Range Of Connectors and Adapters
Connectors & Adapters - FME Range Of Connectors and Adapters Image

Large range of FME connectors and adaptors:

• FME connectors are used for mobile antenna applications and can be adapted for either UHF, Mini-UHF, TNC, BNC and N connector interfaces.
• Specify on what cable the connectors will be terminated onto.
• Crimping tools and heat shrink are available at LinkWorld.

Connectors and Adapters - M/UHF Range of Connectors and Adapters
Connectors and Adapters - M/UHF Range of Connectors and Adapters Image

Large range of Mini/UHF connectors and adaptors:

• Mini-UHF connectors are designed for use as coaxial interconnection in cell phones, automotive systems, and similar applications where size, weight, and cost factors are critical.
• Specify on what cable the connectors will be terminated onto.
• Crimping tools and heat shrink are available at LinkWorld.

Connectors and Adaptors - F Type Range of Connectors and adaptors
Connectors and Adaptors - F Type Range of Connectors and adaptors Image

Large range of F-Type connectors and adaptors:

• Specify on what cable the connectors will be terminated onto.
• Crimping tools and heat shrink are available at LinkWorld.

Connectors and Adaptors - FAKRA
Connectors and Adaptors - FAKRA Image

Large range of FAKRA connectors and adaptors:

• FAKRA connectors are designed for use in automotive systems, and similar applications where size, weight, and cost factors are critical.
• Specify on what cable the connectors will be terminated onto.
• Crimping tools and heat shrink are available at LinkWorld.

Download the PDF for a full list of FAKRA connectors and adaptors available.
Contact us for pricing.

Splitters
Microstrip Splitter 2 Way (also available in SMA) - SN50-2N
Microstrip Splitter 2 Way (also available in SMA) - SN50-2N Image

• Microstrip Splitter 2 Way.
• Frequency 0.8~2.5GHz.
• Insertion loss <3.4dB.
• VSWR <1.30:1.
• Isolation >20dB.
• Termination N/Type female.
• Power Handling 50W.
• Impedance 50 Ohm.
• Temperature -35°C to 60°C.

Typically used in the installation of Cell Signal Boosters.

Microstrip Splitter 3 Way (also available in SMA) - SN50-3N
Microstrip Splitter 3 Way (also available in SMA) - SN50-3N Image

• Microstrip Splitter 3 Way.
• Frequency 0.8~2.5GHz.
• Insertion loss <5.4dB.
• VSWR <1.30:1.
• Isolation >18dB.
• Termination N/Type female.
• Power Handling 50W.
• Impedance 50 Ohm.
• Temperature -35°C to 60°C.

Typically used in the installation of Cell Signal Boosters.

Microstrip Splitter 4 Way (also available in SMA) - SN50-4N
Microstrip Splitter 4 Way (also available in SMA) - SN50-4N Image

• Microstrip Splitter 4 Way.
• Frequency 0.8~2.5GHz.
• Insertion loss <6.8dB.
• VSWR <1.30:1.
• Isolation >18dB.
• Termination N/Type female.
• Power Handling 50W.
• Impedance 50 Ohm.
• Temperature -35°C to 60°C.

Typically used in the installation of Cell Signal Boosters.

Microstrip Splitter 8 Way SMA - SPL-8W-SMA
Microstrip Splitter 8 Way SMA - SPL-8W-SMA Image

• Microstrip Splitter 8 Way SMA.
• Frequency 0.8~2.5GHz.
• Insertion loss <3.4dB.
• VSWR <1.30:1.
• Isolation >20dB.
• Termination SMA.
• Power Handling 50W.
• Impedance 50 Ohm.
• Temperature -35°C to 60°C.

Typically used in the installation of Cell Signal Boosters.

Couplers
Microstrip Coupler 6Db - CPL-6N
Microstrip Coupler 6Db - CPL-6N Image

• Microstrip Coupler.
• Coupling Value 6dB.
• Frequency 0.8~2.5GHz.
• Coupling Loss 1.26dB.
• Insertion loss <0.25/<0.3/>0.50.
• VSWR <1.25.
• Intermodulation>140dBc (+43dBm*2).
• Isolation >18dB.• Termination N/Type female.
• Power Handling 50W.
• Impedance 50 Ohm.
• Temperature -35°C to 60°C.

Typically used in the installation of Cell Signal Boosters.

Microstrip Coupler 10Db - CPL-10N
Microstrip Coupler 10Db - CPL-10N Image

• Microstrip Coupler.
• Coupling Value 10dB.
• Frequency 0.8~2.5GHz.
• Coupling Loss 0.46dB.
• Insertion loss <0.25/<0.3/>0.50.
• VSWR <1.25.
• Intermodulation>140dBc (+43dBm*2).
• Isolation >18dB.
• Termination N/Type female.
• Power Handling 50W.
• Impedance 50 Ohm.
• Temperature -35°C to 60°C.

Typically used in the installation of Cell Signal Boosters.

Microstrip Coupler 20Db - CPL-20N
Microstrip Coupler 20Db - CPL-20N Image

• Microstrip Coupler.
• Coupling Value 20dB.
• Frequency 0.8~2.5GHz.
• Coupling Loss 0.04dB.
• Insertion loss <0.25/<0.3/>0.50.
• VSWR <1.25.
• Intermodulation>140dBc (+43dBm*2).
• Isolation >18dB.• Termination N/Type female.
• Power Handling 50W.
• Impedance 50 Ohm.
• Temperature -35°C to 60°C.

Typically used in the installation of Cell Signal Boosters.

Microstrip Coupler 30Db - CPL-30N
Microstrip Coupler 30Db - CPL-30N Image

• Microstrip Coupler.
• Coupling Value 30dB.
• Frequency 0.8~2.5GHz.
• Coupling Loss 0.004dB.
• Insertion loss <0.25/<0.3/>0.50.
• VSWR <1.25.
• Intermodulation>140dBc (+43dBm*2).
• Isolation >18dB.• Termination N/Type female.
• Power Handling 50W.
• Impedance 50 Ohm.
• Temperature -35°C to 60°C.

Typically used in the installation of Cell Signal Boosters.

Duplexers
DUPLEXER - DP 410 100W
DUPLEXER - DP 410 100W Image

Band Reject Duplexer

• Developed & manufactured in South Africa.
• Resonator coils in VHF versions silver plated.
• Tubular resonators in UHF version silver plated.
• High Frequency & temperature stability.
• Quarter wave cavities on UHF version.

DUPLEXER - DPL 130 50W
DUPLEXER - DPL 130 50W Image

Band Reject Duplexer

• Developed & manufactured in South Africa.
• Resonator coils in VHF versions silver plated.
• Tubular resonators in UHF version silver plated.
• High Frequency & temperature stability.
• Quarter wave cavities on UHF version.

DUPLEXER - DPL 450 50W
DUPLEXER - DPL 450 50W Image

Band Reject Duplexer

• Developed & manufactured in South Africa.
• Resonator coils in VHF versions silver plated.
• Tubular resonators in UHF version silver plated.
• High Frequency & temperature stability.
• Quarter wave cavities on UHF version.

Coaxial Cables 50 Ohms
Coaxial Cable - RG-58C/U Image
Coaxial Cable - RG-58C/U
RG58C/U Coaxial Cable Mil-17F 50 Ohm •RG-58C/U is available on 100 meter reels. Typically used in the installation of Cell Signal Boosters.
Coaxial Cable - RG-213 Image
Coaxial Cable - RG-213
RG213 MIL-SPEC Coaxial Cable,50 Ohm< •RG-58C/U is available on 100 meter reels. Typically used in the installation of Cell Signal Boosters.
Coaxial Cable - RG-174 Image
Coaxial Cable - RG-174
RG174 A/U MIL SPEC Miniature Coaxial Cable, 50 Ohm •RG-58C/U is available on 100 meter reels. Typically used in the installation of Cell Signal Boosters.
Feeder Cables 50 Ohms
Feeder Cable - 1/2 Image
Feeder Cable - 1/2
½” Flexible Low Loss Foam Dielectric. •Copper Clad Aluminium. •Inner Conductor Diameter 4.8mm. •Gas-injected Foam PE. •Dielectric Diameter 12.2mm. •Outer Conductor 14.9mm. •Jacket 16.00m... Read More
Feeder Cable - 7/8 Image
Feeder Cable - 7/8
7/8″Flexible Low Loss Foam Dielectric 50 Ohm. •Copper Clad Aluminium. •Inner Conductor Diameter 9.0mm. •Gas-injected Foam PE. •Dielectric Diameter 23.2mm. •Outer Conductor 24.9mm. •Jacket... Read More
Low Loss Cables 50 Ohms
Coaxial Cable - LWC-195 Low Loss Coaxial Image
Coaxial Cable - LWC-195 Low Loss Coaxial
LWC-195 Super Low Loss Coaxial Cable – Injected Foam Polyethylene – 50 Ohm. • LWC-195 is a black UV Resistant Polyethylene jacketed cable designed for in/outdoor use. • The bending and handling characteristics are sig... Read More
Coaxial Cable - LWC-240 Low Loss Coaxial Image
Coaxial Cable - LWC-240 Low Loss Coaxial
LWC-240 Super Low Loss Coaxial Cable – Injected Foam Polyethylene – 50 Ohm •LWC-240 is available on 100 meter reels. Typically used in the installation of Cell Signal Boosters.
Coaxial Cable - LWC-400 Low Loss Coaxial Image
Coaxial Cable - LWC-400 Low Loss Coaxial
LWC-400 Super Low Loss Coaxial Cable – Injected Foam Polyethene – 50 Ohm. • LLWC-400 is a black UV Resistant Polyethene jacketed cable designed for in/outdoor use. • The bending and handling characteristics are signif... Read More
Coaxial Cable - LWC-600 Super Low Loss Coaxial Image
Coaxial Cable - LWC-600 Super Low Loss Coaxial
LWC-600 Super Low Loss Coaxial Cable – Injected Foam Polyethene – 50 Ohm. • LWC-600 is a black UV Resistant Polyethene jacketed cable designed for in/outdoor use. • The bending and handling characteristics are signifi... Read More
Cables, Connectors and Adapters
Connectors and Adapters - N TYPE Range of Connectors and Adapters Image
Connectors and Adapters - N TYPE Range of Connectors and Adapters
Large range of N-Type connectors and adaptors: • The N series are very popular screw-coupling middle-power coaxial connectors, which are developed and manufactured according to the specifications of MIL-C-39012, IEC 169-16 and ... Read More
Connectors and Adapters - SMA Range of Connectors and Adapters Image
Connectors and Adapters - SMA Range of Connectors and Adapters
Large range of SMA connectors and adapters: • The SMA series is a very popular screw coupling miniature coaxial connector, which is developed and produced according to the relative specifications of MIL-C-39012, IEC 169-15 and ... Read More
Connectors and Adapters - BNC Range Of Connectors And Adapters Image
Connectors and Adapters - BNC Range Of Connectors And Adapters
Large range of BNC connectors and adaptors: • The BNC series are bayonet coupling standard coaxial connectors, which developed and manufactured according to the specifications of MIL-C-39012 and IEC169-8. • They ha... Read More
Connectors and Adapters - TNC Range of Connectors and Adapters Image
Connectors and Adapters - TNC Range of Connectors and Adapters
Large range of TNC connectors and adaptors: • The TNC series are screw-coupling standard coaxial connectors which are developed according to the specifications of MIL-C-39012 and IEC 169-17. • They have the characterist... Read More
Connectors and Adapters - UHF Range of Connectors And Adapters Image
Connectors and Adapters - UHF Range of Connectors And Adapters
Large range of UHF connectors and adaptors: • UHF coaxial connectors are general purpose units developed for use in low-frequency systems from 0.6 – 300 MHz. • Invented for use in the radio industry, UHF is an acronym ... Read More
Connectors & Adapters - FME Range Of Connectors and Adapters Image
Connectors & Adapters - FME Range Of Connectors and Adapters
Large range of FME connectors and adaptors: • FME connectors are used for mobile antenna applications and can be adapted for either UHF, Mini-UHF, TNC, BNC and N connector interfaces. • Specify on what cable the connecto... Read More
Connectors and Adapters - M/UHF Range of Connectors and Adapters Image
Connectors and Adapters - M/UHF Range of Connectors and Adapters
Large range of Mini/UHF connectors and adaptors: • Mini-UHF connectors are designed for use as coaxial interconnection in cell phones, automotive systems, and similar applications where size, weight, and cost factors are critic... Read More
Connectors and Adaptors - F Type Range of Connectors and adaptors Image
Connectors and Adaptors - F Type Range of Connectors and adaptors
Large range of F-Type connectors and adaptors: • Specify on what cable the connectors will be terminated onto. • Crimping tools and heat shrink are available at LinkWorld.
Connectors and Adaptors - FAKRA Image
Connectors and Adaptors - FAKRA
Large range of FAKRA connectors and adaptors: • FAKRA connectors are designed for use in automotive systems, and similar applications where size, weight, and cost factors are critical. • Specify on what cable the connect... Read More
Splitters
Microstrip Splitter 2 Way (also available in SMA) - SN50-2N Image
Microstrip Splitter 2 Way (also available in SMA) - SN50-2N
• Microstrip Splitter 2 Way. • Frequency 0.8~2.5GHz. • Insertion loss <3.4dB. • VSWR <1.30:1. • Isolation >20dB. • Termination N/Type female. • Power Handling 50W. • Impe... Read More
Microstrip Splitter 3 Way (also available in SMA) - SN50-3N Image
Microstrip Splitter 3 Way (also available in SMA) - SN50-3N
• Microstrip Splitter 3 Way. • Frequency 0.8~2.5GHz. • Insertion loss <5.4dB. • VSWR <1.30:1. • Isolation >18dB. • Termination N/Type female. • Power Handling 50W. • Impe... Read More
Microstrip Splitter 4 Way (also available in SMA) - SN50-4N Image
Microstrip Splitter 4 Way (also available in SMA) - SN50-4N
• Microstrip Splitter 4 Way. • Frequency 0.8~2.5GHz. • Insertion loss <6.8dB. • VSWR <1.30:1. • Isolation >18dB. • Termination N/Type female. • Power Handling 50W. • Impe... Read More
Microstrip Splitter 8 Way SMA - SPL-8W-SMA Image
Microstrip Splitter 8 Way SMA - SPL-8W-SMA
• Microstrip Splitter 8 Way SMA. • Frequency 0.8~2.5GHz. • Insertion loss <3.4dB. • VSWR <1.30:1. • Isolation >20dB. • Termination SMA. • Power Handling 50W. • Impedance ... Read More
Couplers
Microstrip Coupler 6Db - CPL-6N Image
Microstrip Coupler 6Db - CPL-6N
• Microstrip Coupler. • Coupling Value 6dB. • Frequency 0.8~2.5GHz. • Coupling Loss 1.26dB. • Insertion loss <0.25/<0.3/>0.50. • VSWR <1.25. • Intermodulation>140dBc (+43dB... Read More
Microstrip Coupler 10Db - CPL-10N Image
Microstrip Coupler 10Db - CPL-10N
• Microstrip Coupler. • Coupling Value 10dB. • Frequency 0.8~2.5GHz. • Coupling Loss 0.46dB. • Insertion loss <0.25/<0.3/>0.50. • VSWR <1.25. • Intermodulation>140dBc (+43d... Read More
Microstrip Coupler 20Db - CPL-20N Image
Microstrip Coupler 20Db - CPL-20N
• Microstrip Coupler. • Coupling Value 20dB. • Frequency 0.8~2.5GHz. • Coupling Loss 0.04dB. • Insertion loss <0.25/<0.3/>0.50. • VSWR <1.25. • Intermodulation>140dBc (+43d... Read More
Microstrip Coupler 30Db - CPL-30N Image
Microstrip Coupler 30Db - CPL-30N
• Microstrip Coupler. • Coupling Value 30dB. • Frequency 0.8~2.5GHz. • Coupling Loss 0.004dB. • Insertion loss <0.25/<0.3/>0.50. • VSWR <1.25. • Intermodulation>140dBc (+43... Read More
Duplexers
DUPLEXER - DP 410 100W Image
DUPLEXER - DP 410 100W
Band Reject Duplexer • Developed & manufactured in South Africa. • Resonator coils in VHF versions silver plated. • Tubular resonators in UHF version silver plated. • High Frequency & temperature ... Read More
DUPLEXER - DPL 130 50W Image
DUPLEXER - DPL 130 50W
Band Reject Duplexer • Developed & manufactured in South Africa. • Resonator coils in VHF versions silver plated. • Tubular resonators in UHF version silver plated. • High Frequency & temperature ... Read More
DUPLEXER - DPL 450 50W Image
DUPLEXER - DPL 450 50W
Band Reject Duplexer • Developed & manufactured in South Africa. • Resonator coils in VHF versions silver plated. • Tubular resonators in UHF version silver plated. • High Frequency & temperature ... Read More

Our Brands