Accessories

6
Yes
None
1
50
Name...
/products/accessories/
Thumbnail

Categories:

Battery Charger
Battery Charger - Chargers
Battery Charger - Chargers Image

Battery chargers for all makes of Portables.

Battery Charger -12Vdc 10A
Battery Charger -12Vdc 10A Image

• PM-DCB Battery Chargers.
• Available in 6A,10A,25A,45A.
• 3 LED Display.
• Short Circuit Protection.
• Overload Protection.
• Reverse Polarity Protection.
• Automatic Multi-rate Charging Function.
• Temperature Controlled Fan (45°C).
• Temperature Protection.
• Charge Curve Selection.
• High Efficiency & Frequency Design.
• Charge for Lead Acid Battery.
• Also available in 24Vdc and 48Vdc versions.

Battery Charger - 12Vdc 100A
Battery Charger - 12Vdc 100A Image

• PM-DCB Battery Chargers.
• 100A.
• 3 LED Display.
• Short Circuit Protection.
• Overload Protection.
• Reverse Polarity Protection.
• Automatic Multi-rate Charging Function.
• Temperature Controlled Fan (45°C).
• Temperature Protection.
• Charge Curve Selection.
• High Efficiency & Frequency Design.
• Charge for Lead Acid Battery.
• Also available in 24Vdc and 48Vdc versions.

Battery Enclosure
Battery Enclosure 370 X 260 X 200Mm - BBP01
Battery Enclosure 370 X 260 X 200Mm - BBP01 Image

PVC Battery Enclosure 370 x 260 x 200mm
• To House 1 x 100Ahr Battery for Solar Instaltion.
• Mast mountable.

Batteries
Battery 12Vdc 7Ahr
Battery 12Vdc 7Ahr Image

Battery 12Vdc 7Ahr Sealed lead-acid:
• Cycle use 14.4-15.OV.
• Standby use uses 15.4-13.8V.
• Initial Current 2.1A.

A high rate discharge for use with security alarm systems and 2 Way Radio power supply.

Battery 12Vdc 100Ahr
Battery 12Vdc 100Ahr Image

Battery 12Vdc 100Ahr:
• Sealed gel-acid Available in Deep Cycle.
• Calcium-Calcium High Cyle Maintenance Free Batteries for Solar Installation.

Brackets
Wall Mount Bracket - 450mm - WM-450
Wall Mount Bracket - 450mm - WM-450 Image

Wall Mount Bracket – 400mm Stand Off
• Galvanised 40mm x 40mm x 4mm angle iron welded construction to install 50mm mast pole to a wall using U or V bolts.
• The bracket is fastened to the wall with Rawl bolt fasteners.
• Measured 450mm from wall to centre of mast.

Wall Mount Bracket - 1000mm - WM-1000
Wall Mount Bracket - 1000mm - WM-1000 Image

Wall Mount Bracket – 1000mm Stand Off
• Galvanised 40mm x 40mm x 4mm angle iron welded construction to install 50mm mast pole to a wall using U or V bolts.
• The bracket is fastened to the wall with Rawl bolt fasteners.

Wall Mount Tri-Pod Bracket - WM-TRI-POD-150mm
Wall Mount Tri-Pod Bracket - WM-TRI-POD-150mm Image

Wall Mount Bracket Tri-Bracket – 150mm
• Galvinised 30mm x 30mm x 2.5mm angle iron welded contstruction to install 50mm mast pole to a wall using U or V bolts.
• The bracket is fastend to the wall with Rawl bolt fasteners.
• Tri-pod bracket measured 150mm from wall to centre of mast.

Wall Mount Tri-Pod Brackett - WM-TRI-POD-300mm
Wall Mount Tri-Pod Brackett - WM-TRI-POD-300mm Image

Wall Mount Bracket Tri-Bracket – 3000mm
• Galvinised 30mm x 30mm x 2.5mm angle iron welded contstruction to install 50mm mast pole to a wall using U or V bolts.
• The bracket is fastend to the wall with Rawl bolt fasteners.
• Tri-pod bracket measured 150mm from wall to centre of mast.

Rawl-Bolts Fasteners - RAWL-BOLTS
Rawl-Bolts Fasteners - RAWL-BOLTS Image

Rawl Bolt Wall Fasteners
• Assorted sizes
• M6, M8, M10.

Mast brackets - Parralel Clamp
Mast brackets - Parralel Clamp Image

Bracket designed to clamp one pole parralel to an exsisting pole.
Sizes it can clamp are 40mm to 70mm

Inverters
Inverter - Inverters
Inverter - Inverters Image

150W~`1000W 12V,24V & 48V Inverters.

Masts and Poles
Aluminium Mast 40mm X 1.9Mm X 6met - ALU-P 40 x 1.9 x 6met
Aluminium Mast 40mm X 1.9Mm X 6met - ALU-P 40 x 1.9 x 6met Image

Aluminium Tubular mast poles.
• 40mm x 1.9mm wall thickness and 6 meters long.

Aluminium Mast 50mm X 1.9mm X 6met - ALU-P 50 x 1.9 x 6met
Aluminium Mast 50mm X 1.9mm X 6met - ALU-P 50 x 1.9 x 6met Image

Aluminium Tubular mast poles.
• 50mm x 1.9mm wall thickness and 6 meters long.

Aluminium Mast 50mm X 3mm X 6met - ALU-P 50 x 3 x 6met
Aluminium Mast 50mm X 3mm X 6met - ALU-P 50 x 3 x 6met Image

Aluminium Tubular mast poles.
• 50mm x 3mm wall thickness and 6 meters long.

Aluminium Mast 50mm X 5mm X 6met - ALU-P 50 x 5 x 6met
Aluminium Mast 50mm X 5mm X 6met - ALU-P 50 x 5 x 6met Image

Aluminium Tubular mast poles.
• 50mm x 5mm wall thickness and 6 meters long.

Telescopic Mast 12Meter - MAST-TEL-12met
Telescopic Mast 12Meter - MAST-TEL-12met Image

Mast 12 meter telescopic with guy wires.

V/ Bolts - V/ bolts
V/ Bolts - V/ bolts Image

V/ bolts. The V bolt has the unique feature that it centralises the mast or pole it is installed to clamp down. An additional feature is that it accepts different diameter masts.

Galvinised Mast - 50 x 1.2 x 6 meter
Galvinised Mast - 50 x 1.2 x 6 meter Image

Galvanized Tubular mast poles.
• 50mm x 31.2m wall thickness and 6 meters long.

Galvanised Mast - 50 x 2 x 6 meter
Galvanised Mast - 50 x 2 x 6 meter Image

Galvanised Tubular mast poles.
• 50mm x 2mm wall thickness and 6 meters long.

Power Supplies
Power Supply - P/S 12Vdc 7~9A
Power Supply - P/S 12Vdc 7~9A Image

Power Supply
• DC regulated 12Vdc .
• 20~22A .
• Power supply for two-way radio.

Power Supply - P/S 12V dc 10~12A +Battery Back-up
Power Supply - P/S 12V dc 10~12A +Battery Back-up Image

Power Supply
• DC regulated 12V dc.
• 10~12A .
• With battery back-up (7Ahr Battery supplied separately).
• Power supply for two-way radio.
• UPS for 12V dc equipment.

Power Supply - P/S 12V dc 20~22A
Power Supply - P/S 12V dc 20~22A Image

Power Supply
• DC regulated 12V dc.
• 20~22A .
• Power supply for two-way radio.

Power Supply - P/S 12V dc 30~32A
Power Supply - P/S 12V dc 30~32A Image

Power Supply
• DC regulated 12V dc.
• 20~22A .
• Power supply for two-way radio.

Tools
Tools - Coaxial Connector Crimping Tools
Tools - Coaxial Connector Crimping Tools Image

Crimping Tool for RG174 CR-174.
Crimping Tool for RG58 CR-58.
Crimping Tool for RG213 CR-213.
Crimping Tool for RG214 CR-214.
Crimping Tool for RG6 CR-6.
Crimping Tool for LWC195 CR-195.
Crimping Tool for LWC400 CR-400.
Crimping Tool for RJ CR-RJ.

Tools - SIGNAL STRENGTH METER for GSM-900/1800/2100 MHz
Tools - SIGNAL STRENGTH METER for GSM-900/1800/2100 MHz Image

• This is an extremely extensive GSM/DSC/WCDMA Signal Strength tester enabling the user to identify, locate and interrogate vital information from all BTS sites in the test vicinity. Popular as a test tool for engineers and installers looking to get the optimum site for their cellular antennas. It is ideal for surveying a proposed site for a suitable radio signal, with or without a SIM card fitted via its integrated display.
• Quad Band – Detects all worldwide GSM/DSC/UMTS operating frequencies (850, 900, 1800, 1900, 2100 MHz).
• Allows detailed interrogation of cell sites detected i.e frequency, operator, cell ID.
• Ready to use out of the box – no additional programming required.
• 1.75inch display for easy viewing of menus and site survey results.
• Works with or without SIM card – with a SIM card it will pick up that network only (band selective), without a SIM card it will pick up all networks (Wide Band) in the test vicinity.
• Up to 12 hours between charges and auto shut off feature. A real field tool.
• Version 2.6 firmware to allow additional GPRS network connectivity test.
• Meets CE0168 European Radio Communication standards.
• Designed and Manufactured in the U.K.
• The signal strength tester omni antenna is removable from its SMA bulkhead base. This allows the meter to be used to determine BTS direction, ID, RSSI and signal quality from the installation donor antenna. After the installation, the omni antenna can be placed back onto the meter to access the site coverage, signal strength and signal quality of the coverage site.
The meter is supplied with a built-in battery allowing remote operation for up to 12 hours. It comes with a ruggedized outer case and is supplied complete with direct mounted quad band antenna, UK mains charger and full documentation.
A must for all cell extender installers.

Battery Charger
Battery Charger - Chargers Image
Battery Charger - Chargers
Battery chargers for all makes of Portables.
Battery Charger -12Vdc 10A Image
Battery Charger -12Vdc 10A
• PM-DCB Battery Chargers. • Available in 6A,10A,25A,45A. • 3 LED Display. • Short Circuit Protection. • Overload Protection. • Reverse Polarity Protection. • Automatic Multi-rate Chargin... Read More
Battery Charger - 12Vdc 100A Image
Battery Charger - 12Vdc 100A
• PM-DCB Battery Chargers. • 100A. • 3 LED Display. • Short Circuit Protection. • Overload Protection. • Reverse Polarity Protection. • Automatic Multi-rate Charging Function. • T... Read More
Battery Enclosure
Battery Enclosure 370 X 260 X 200Mm - BBP01 Image
Battery Enclosure 370 X 260 X 200Mm - BBP01
PVC Battery Enclosure 370 x 260 x 200mm • To House 1 x 100Ahr Battery for Solar Instaltion. • Mast mountable.
Batteries
Battery 12Vdc 7Ahr Image
Battery 12Vdc 7Ahr
Battery 12Vdc 7Ahr Sealed lead-acid: • Cycle use 14.4-15.OV. • Standby use uses 15.4-13.8V. • Initial Current 2.1A. A high rate discharge for use with security alarm systems and 2 Way Radio power supply.... Read More
Battery 12Vdc 100Ahr Image
Battery 12Vdc 100Ahr
Battery 12Vdc 100Ahr: • Sealed gel-acid Available in Deep Cycle. • Calcium-Calcium High Cyle Maintenance Free Batteries for Solar Installation.
Brackets
Wall Mount Bracket - 450mm - WM-450 Image
Wall Mount Bracket - 450mm - WM-450
Wall Mount Bracket – 400mm Stand Off • Galvanised 40mm x 40mm x 4mm angle iron welded construction to install 50mm mast pole to a wall using U or V bolts. • The bracket is fastened to the wall with Rawl bolt fasteners.... Read More
Wall Mount Bracket - 1000mm - WM-1000 Image
Wall Mount Bracket - 1000mm - WM-1000
Wall Mount Bracket – 1000mm Stand Off • Galvanised 40mm x 40mm x 4mm angle iron welded construction to install 50mm mast pole to a wall using U or V bolts. • The bracket is fastened to the wall with Rawl bolt fasteners.... Read More
Wall Mount Tri-Pod Bracket - WM-TRI-POD-150mm Image
Wall Mount Tri-Pod Bracket - WM-TRI-POD-150mm
Wall Mount Bracket Tri-Bracket – 150mm • Galvinised 30mm x 30mm x 2.5mm angle iron welded contstruction to install 50mm mast pole to a wall using U or V bolts. • The bracket is fastend to the wall with Rawl bolt fastene... Read More
Wall Mount Tri-Pod Brackett - WM-TRI-POD-300mm Image
Wall Mount Tri-Pod Brackett - WM-TRI-POD-300mm
Wall Mount Bracket Tri-Bracket – 3000mm • Galvinised 30mm x 30mm x 2.5mm angle iron welded contstruction to install 50mm mast pole to a wall using U or V bolts. • The bracket is fastend to the wall with Rawl bolt fasten... Read More
Rawl-Bolts Fasteners - RAWL-BOLTS Image
Rawl-Bolts Fasteners - RAWL-BOLTS
Rawl Bolt Wall Fasteners • Assorted sizes • M6, M8, M10.
Mast brackets - Parralel Clamp Image
Mast brackets - Parralel Clamp
Bracket designed to clamp one pole parralel to an exsisting pole. Sizes it can clamp are 40mm to 70mm
Inverters
Inverter - Inverters Image
Inverter - Inverters
150W~`1000W 12V,24V & 48V Inverters.
Masts and Poles
Aluminium Mast 40mm X 1.9Mm X 6met - ALU-P 40 x 1.9 x 6met Image
Aluminium Mast 40mm X 1.9Mm X 6met - ALU-P 40 x 1.9 x 6met
Aluminium Tubular mast poles. • 40mm x 1.9mm wall thickness and 6 meters long.
Aluminium Mast 50mm X 1.9mm X 6met - ALU-P 50 x 1.9 x 6met Image
Aluminium Mast 50mm X 1.9mm X 6met - ALU-P 50 x 1.9 x 6met
Aluminium Tubular mast poles. • 50mm x 1.9mm wall thickness and 6 meters long.
Aluminium Mast 50mm X 3mm X 6met - ALU-P 50 x 3 x 6met Image
Aluminium Mast 50mm X 3mm X 6met - ALU-P 50 x 3 x 6met
Aluminium Tubular mast poles. • 50mm x 3mm wall thickness and 6 meters long.
Aluminium Mast 50mm X 5mm X 6met - ALU-P 50 x 5 x 6met Image
Aluminium Mast 50mm X 5mm X 6met - ALU-P 50 x 5 x 6met
Aluminium Tubular mast poles. • 50mm x 5mm wall thickness and 6 meters long.
Telescopic Mast 12Meter - MAST-TEL-12met Image
Telescopic Mast 12Meter - MAST-TEL-12met
Mast 12 meter telescopic with guy wires.
V/ Bolts - V/ bolts Image
V/ Bolts - V/ bolts
V/ bolts. The V bolt has the unique feature that it centralises the mast or pole it is installed to clamp down. An additional feature is that it accepts different diameter masts.
Galvinised Mast - 50 x 1.2 x 6 meter Image
Galvinised Mast - 50 x 1.2 x 6 meter
Galvanized Tubular mast poles. • 50mm x 31.2m wall thickness and 6 meters long.
Galvanised Mast - 50 x 2 x 6 meter Image
Galvanised Mast - 50 x 2 x 6 meter
Galvanised Tubular mast poles. • 50mm x 2mm wall thickness and 6 meters long.
Power Supplies
Power Supply - P/S 12Vdc 7~9A Image
Power Supply - P/S 12Vdc 7~9A
Power Supply • DC regulated 12Vdc . • 20~22A . • Power supply for two-way radio.
Power Supply - P/S 12V dc 10~12A +Battery Back-up Image
Power Supply - P/S 12V dc 10~12A +Battery Back-up
Power Supply • DC regulated 12V dc. • 10~12A . • With battery back-up (7Ahr Battery supplied separately). • Power supply for two-way radio. • UPS for 12V dc equipment.
Power Supply - P/S 12V dc 20~22A Image
Power Supply - P/S 12V dc 20~22A
Power Supply • DC regulated 12V dc. • 20~22A . • Power supply for two-way radio.
Power Supply - P/S 12V dc 30~32A Image
Power Supply - P/S 12V dc 30~32A
Power Supply • DC regulated 12V dc. • 20~22A . • Power supply for two-way radio.
Tools
Tools - Coaxial Connector Crimping Tools Image
Tools - Coaxial Connector Crimping Tools
Crimping Tool for RG174 CR-174. Crimping Tool for RG58 CR-58. Crimping Tool for RG213 CR-213. Crimping Tool for RG214 CR-214. Crimping Tool for RG6 CR-6. Crimping Tool for LWC195 CR-195. Crimping Tool ... Read More
Tools - SIGNAL STRENGTH METER for GSM-900/1800/2100 MHz Image
Tools - SIGNAL STRENGTH METER for GSM-900/1800/2100 MHz
• This is an extremely extensive GSM/DSC/WCDMA Signal Strength tester enabling the user to identify, locate and interrogate vital information from all BTS sites in the test vicinity. Popular as a test tool for engineers and installers ... Read More

Our Brands