Also see: ANTENNAS /
MID_BAND

2 Stacked Array (2S-60)
• Two Stack Systems is built in the 66-88MHz frequency spectrum. • Two and Four stack systems are supplied with the mounted phasing harness and dipoles on or supplied without the support pole. • Harnesses can be ordered seperately. • Specify RX & TX frequencies to centre harness. • Termination is standard to always fit dipoles unless otherwise specified. All nessasary clamps for dipoles are included. Feeder cable, splitters and jumper cables are available. Mast poles and wall mount brackets per requirement. .

---

4 Stacked Array (4S-60)
• Two & Four Stack Systems are built in the 390-470MHz frequency spectrum. • Two and Four stack systems are supplied with the phasing harness and dipoles mounted onto or supplied without the support pole. • Harnesses can be ordered seperately. • Specify RX & TX frequencies to centre harness. • Termination is standard to always fit dipoles unless specified. All nessasary clamps are included. Feeder, splitters and jumper cables are available. Mast poles and wall mount brackets per requirement.

---

End Fed Antennas (EF68 & EF72 & EF76)
• The End Fed is sturdy, reliable basic unity gain antenna. • Manufacture from clear anodised aluminium. • Frequency range:EF68 66-70MHz EF72 70-7458MHz EF76 74-78MHz. • VSWR <1.5:1. • B/W AT B/W AT 1.5:1 SWR. • 50 Ohms. • 100 Watts. • Wind velocity 160Km/hr.

---

End Fed Antennas (EF80 & EF84)
• The End Fed is sturdy, reliable basic unity gain antenna. • Manufacture from clear anodised aluminium. • Frequency range:EF80 78-82MHz EF84 82-84MHz. • VSWR <1.5:1. • B/W AT B/W AT 1.5:1 SWR. • 50 Ohms. • 100 Watts. • Wind velocity 160Km/hr.

---

Fiberglass Collinears (FG68 FG70 FG75 FG80)
• The radiating elements are housed in a fiberglass tube giving weather durability and strength in high winds and rejecting ice buildup. • Fiberglass tube is taper designed to add resilience and to allow movement in sub zero conditions. • Aluminum Mounting bracket. • Antenna comes with 1 Meter tail fitted with N-Type male connector. • Antenna comes complete with all necessary mounting hardware. • Gain 4dBi. • Rx and Tx to be specified. • These antennas are built to order. • Winds 200Kmh.

---

Folded Dipole 100 (FD 100)
Specification • Frequency: 88-108MHz. • Gain: Unity. • VSWR: <1.5:1. • Horizontal Beam width: 360°. • Band Width: 25MHz. • Max Power: 500W. • Impendence: 50 Ohm. • Polarization: Vertical. • Lightning Protection: DC Grounded. • Weight: 3kg. • Dimension: 1340 x 1250mm. • Termination: UHF Female. • Radiating Element: Anodised Aluminum. • Max Wind Velocity: 165Km/h. Pole mountable. All necessary brackets and clamps are included. Feeder and jumper cables are available. Mast poles and wall mount brackets per requirement.

---

Folded Dipole 60 (FD 60)
Specification • Frequency: 54-64MHz. • Gain: Unity. • VSWR: <1.5:1. • Horizontal Beam width: 360°. • Band Width: 22MHz. • Max Power: 500W. • Impendence: 50 Ohm. • Polarization: Vertical. • Lightning Protection: DC Grounded. • Weight: 2.5kg. • Dimension: 1340 x 1250mm. • Termination: UHF Male. • Radiating Element: Anodised Aluminum. • Max Wind Velocity: 180Km/h. Pole mountable. All necessary brackets and clamps are included. Feeder and jumper cables are available. Mast poles and wall mount brackets per requirement.

---

Folded Dipole 80 (FD 80)
Specification • Frequency: 74-88MHz. • Gain: Unity. • VSWR: <1.5:1. • Horizontal Beam width: 360°. • Band Width: 22MHz. • Max Power: 500W. • Impendence: 50 Ohm. • Polarization: Vertical. • Lightning Protection: DC Grounded. • Weight: 2.5kg. • Dimension: 1340 x 1250mm. • Termination: UHF female. • Radiating Element: Anodised Aluminum. • Max Wind Velocity: 180Km/h. Pole mountable. All necessary brackets and clamps are included. Feeder and jumper cables are available. Mast poles and wall mount brackets per requirement.

---

Helical - hand held radio antenna (Hel 60)
• Well manufactured from durable materials presenting you with a strong, tunable portable rubber duck antenna available with all terminations. • Unity gain • Cutting chart to trim to frequency • VSWR <1.3:1 • Rated 100W

---

Mobile Antenna (MA50 Whip Assembley)
• Mobile Antenna whip assembly. • 66-88MHz tuned per cutting chart. • Includes S/S tapered 74" whip. • This is a universal whip assembly that will fit almost any antenna base not confining the installer to a specific supplier. • 50Watts.

---

Mobile Antenna (MA60 Whip Assembly)
• Mobile Antenna whip assembly. • 66-88MHz tuned per cutting chart. • Includes S/S tapered 74" whip. • Stainless Steel coil spring and adaptor in mirror chrome finish. • This is a universal whip assembly that will fit almost any antenna base not confining the installer to a specific supplier. • 50Watts.

---

Sentinel 68 (Sen 68/3)
Sentinel is a magnificent antenna with • a bandwidth of 22MHz. • Centre of Bandwidth is 68MHz. • Frequency range 66-88MHz. • Gain of 3dBi or 6dBi or (dBi • VSWR <1.3:1 • Rated 500W • Length 2690mm • Weight 2.3Kg. • DC Grounded • Terminated UHF Female • Material: Anodised Aluminum. • Radiating Element: Copper. • Max Wind Velocity: 200Km/h. • Pole or wall mountable. All necessary brackets and clamps are included. Feeder and jumper cables are available. Mast poles and wall mount brackets per requirement.

---

Two/Four Stack Harnesses (SH2 & SH3)
• Two and Four stack systems are supplied with a phasing harness and dipoles mounted on or without support pole. • Harnesses can be ordered seperately. • Specify RX & TX frequencies.

---

Yagi 60 Range (Y-60)
• Frequency: 66-88MHz. • Available in 3E,4E,6E. • VSWR: = 1:5:1. • Approx. Horizontal Beamwidth: 35°. • Approx. Vertical Beamwidth: 45°. • Max Power: 500W. • Impendance: 50 Ohms. • Polarization: Vertical. • Lightning Protection: DC Grounded. • Colour: Aluminium. Pole mountable. All nessasary clamps are included. Feeder cables, splitters and jumper cables are available. Mast poles and wall mount brackets as per requirement.

---